Product specification:

1, thickness: our company can provide product thickness: 0.3mm - 1.0mm, the conventional thickness is: 0.5mm. Other thickness specifications are non-standard thickness.

2, width: maximum width 2000mm

3, length: commonly used specifications of 0.5mm products, the length of each coil is 100 meters, the other are non-standard specifications, large quantities can be customized

Product packaging: 1. inner packing 100 meters / roll, aluminum foil vacuum packaging.

2. outer packing is special compression carton, 1 rolls / box.

Storage and transportation: 1, stored in a cool and dry room temperature, temperature less than 30 degrees, humidity is less than 70%;

2. Avoid sunlight exposure on the film surface, avoid contact with water, grease, organic solvents and other chemicals;

3, the product long-term stacking height is not easy to be too high, with three layers as good, so as not to press the product bending deformation;

4, stacked in Pyramid style, do not cross stack;

5, can not be exposed to the air for a long time, so as not to affect its performance;

6. This product is stored for six months;

7. Avoid direct sunlight during transportation, prevent rain, moisture and dust.

8, in the process of transportation to prevent heavy pressure, light handle.

Note: 1. Ensure the storage and use of EVA film in a room with constant temperature and humidity;

2, in order to avoid static electricity in the cutting process, it is recommended to install electrostatic removal equipment. Employees need to wear dustproof clothing and dust cap, to avoid hair falling to the EVA film. Use degreasing gloves to prevent pollution;

3, cut into a piece of EVA film should be sealed to avoid dust, gloves and other fiber and other foreign body pollution;

4, workshop should be equipped with necessary equipment to avoid mosquito pollution glue film;

5, in the EVA film cutting, do not force glue film, to prevent deformation, affecting the use of performance;

6, do not damp the product, open the packaging or cut the glue film, it is recommended to run out within 48 hours;