Cipp lined pipeline membrane

Cipp lined pipeline membrane

     Cipp non excavation pipeline repair uses protective inner membrane and UV resistant outer membrane to make pipe lining. The construction process of this technology does not require excavation, occupies a small area, and has little impact on the surrounding environment and traffic. It has obvious advantages in repairing drainage pipelines in non excavation areas or busy streets; This process has a short construction time, resulting in a high strength and small wall thickness of the inner lining pipe, which is closely adhered to the original pipeline. In addition, the surface of the inner lining pipe is smooth, without joints, and has good fluidity, greatly reducing the loss of the flow cross-section of the original pipeline. Compared with the traditional water turning CIPP method, the material has better mechanical properties, and the material used for structural repair of drainage pipelines only requires less than half the thickness of water turning; No wastewater is generated during the solidification process.

thickness(mm)

width(mm)

length(mm)

Inner diameter of cylinder core(mm)

specifications

deviation

specifications

deviation

specifications

deviation

specifications

deviation

20-32

±0.005

customizable

±1

customizable

Not lower than the indicated value

76

±1

project

index

base material

PE film, paper, non-woven fabric

Adhesive category

Hot melt adhesive

180° peel strength,g/25mm

>3200

Initial adhesion force,#

≥10

Holding Power,h

20-24

notes

Customized according to customer requirements

Hotline: +086 0536-3399617
Copyright©2025 Linqu Jiaxing Plastic Co., Ltd